The pH7 calibration solution is used to calibrate the pH electrode.

Quantity:  1 2 3 4 5

The pH10 calibration solution is used to calibrate the pH electrode.

Quantity:  1 2 3 4 5

The 52mS calibration solution is used to calibrate the Marine EC electrode.

Quantity:  1 2 3 4 5

The calibration solution 53 mS/cm is used to calibrate the high conductivity electrode correctly.

Quantity:  1 2 3 4 5

The 220 mV calibration solution allows the redox electrode to be calibrated correctly.

Quantity:  1 2 3 4 5

The electrode cleaning solution enables the correct routine maintenance of the electrodes.

Quantity:  1 2 3 4 5

Quantity:  1 2 3 4 5

The temperature sensor is used to measure the temperature of the water in continuous immersion.

Quantity:  1 2 3 4 5

Power unit with 6 sockets (Australia standard).

Quantity:  1 2 3 4 5

The control unit is the heart of the Aquarium Controller system. With this control unit, the user can configure the settings of a soft or salt water aquarium (or both at the same time) and consult the data of the measurements taken.

Quantity:  1 2 3 4 5

PH Interface for measuring and checking the pH in the aquarium, by simply connecting an Aquatronica pH electrode

Quantity:  1 2 3 4 5

The water leakage interface is used to connect one or two water leakage sensors to the system.

Quantity:  1 2 3 4 5

Active Hub allows other Aquatronica accessories to be connected to the Control systems, when every connector on the multioutlets is already being used for other connections

Quantity:  1 2 3 4 5

The level sensor is used to check the level of water in the aquarium or in an external filter (sump), providing, for example, the possibility to top-up the water automatically thanks to the controllers special program.

Quantity:  1 2 3 4 5

The pH electrode is for measuring the pH level on an aquarium in continuous immersion.

Quantity:  1 2 3 4 5

The water leakage sensor is used to detect feasible leakages of water on flat surfaces where the aquarium is positioned: in this way, based on how it is programmed, certain functions can be enabled or disabled and/or some alarms can be triggered to minimi

Quantity:  1 2 3 4 5

The probe bracket is used to fit all types of Aquatronica probes and electrodes in aquariums.

Quantity:  1 2 3 4 5